For more information email our support team at enquiries@airventtechnology.co.uk or call the Information Hotline on +44 (0)1264 356415

Heat Recovery Units

  • INTERNAL & EXTERNAL: SIDE BY SIDE & STACKED ELECTRIC HEATER BATTERY or LPHW HEATING COIL

Features

    • 11 models
    • Super quiet - high performance acoustic lining
    • Integral trickle and boost, and isolator
    • Airflow to .0.95m3/sec
    • Double skinned (HRP1EC & HRP2EC single) with rockwool infill
    • Complete with face and bypass damper (except HRP1EC and HRP2EC)
    • Latent heat exchange with complete separation of supply and exhaust air flows - no cross contamination
    • Inlets and outlets fitted with "Mez" type duct connecting flanges (HRP1EC and HRP2EC - circular inlets and outlets)
    • Rigid casing construction. HRP1EC and HRP2EC with integral mounting points for floor or ceiling mounting
    • Casing can be powder coated to any BS or RAL colour
    • Panel filters fit into slide-in channels
    • Filter access doors fitted with quarter turn fasteners - all other removable panels retained via set screws fitted with weather caps (except HRP1 and HRP2)
    • Internal units finished in galvanised steel
    • External units air inlets protected by weatherproof cowl and bird guard
    • Roof mounted units with light grey plastisol exterior to BS10A05
    • Direct drive single inlet, single width, backward curved centrifugal type fans
    • Fan blades statically and dynamically balanced in accordance with ISO 1940/1 and balancing quality G6.3
    • Cross flow plate heat exchangers 100% composite construction - efficiencies from 55%. Profiled aero-foil inlets and exits ensure minimum pressure drop and even air distribution. Up to 95% recycled material used in construction - 100% recyclable. HRP1EC and HRP2EC with metal construction cross flow plate heat exchangers
    • EHBs for 1ph and 3ph operation are manufactured from sheathed rod elements with an integral, manual reset thermal cut-out for wiring into control unit
    • LPHW batteries from copper tubes mechanically bonded to aluminium fins supplied with standard BSP male connections
    • Maximum air temperature 40ºC
    • Panel filters from bonded and coated spun glass fibre to G3 grade, fitted as standard. Higher degree of filtration available
    • Manufactured in UK to ISO 9001
    • ENERGY EFFICIENT, ENVIRONMENTALLY FRIENDLY, ECONOMICAL EC MOTORS - ErP COMPLIANT
Infinity Heat Recovery Units

Maximum Air Volume

      Heat Recovery Units - Maximum Air Volume

Technical Data HRP1EC

      Heat Recovery Units - Technical Data HRP1EC

Technical Data HRP2EC

      Heat Recovery Units - Technical Data HRP2EC

Dimensions - HRP1EC & HRP2EC

      Heat Recovery Units - Dimensions - HRP1EC & HRP2EC Heat Recovery Units - Dimensions - HRP1EC & HRP2EC

Technical Data HRP3EC

      Heat Recovery Units - Technical Data HRP3EC

Technical Data HRP4EC

      Heat Recovery Units - Technical Data HRP4EC

Technical Data HRP5-1EC

      Heat Recovery Units - Technical Data HRP5-1EC

Technical Data HRP5-2EC

      Heat Recovery Units - Technical Data HRP5-2EC

Technical Data HRP5-3EC

      Heat Recovery Units - Technical Data HRP5-3EC

Technical Data HRP6-1EC

      Heat Recovery Units - Technical Data HRP6-1EC

Technical Data HRP6-2EC

      Heat Recovery Units - Technical Data HRP6-2EC

Dimensions

      Heat Recovery Units - Dimensions Heat Recovery Units - Dimensions

Technical Data HRP350-1

      Heat Recovery Units - Technical Data HRP350-1

Technical Data HRP350-2

      Heat Recovery Units - Technical Data HRP350-2

Dimensions - HRP350s

      Heat Recovery Units - Dimensions - HRP350s

Leaflet

O & M - HRP1-EC and HRP2-EC

O & M - HRP350-EC

O & M - HRPs-EC

O & M - HRRs-EC